Description
The Fluke T5-600 Electrical Tester lets you check voltage, current, and continuity, with one simple tool. With the T5, the tester does all the work and all you have to do is select ohms, volts, or current. Openjaw ™ current allows you to easily check current up to 100A without damaging the circuit.
The T5's tough test leads stow perfectly in the back of the tester, making it easy to carry the T5 with you. The test leads accept optional accessories such as specialty probes and clips. Detachable SlimReach ™ technology test probes are made specifically for national eletrical standards. The T5 is available in both 600V and 1000V models, and has an optional H5 holster that allows you to carry it on your belt.
Features and Benefits
- Continuity beeper
- Displays resistance up to 1000Ω
- Compact design with quality probe storage.
- Easy and precise OpenJaw™ current measurement.
- Tough enough to withstand a 10-foot (3m) drop.
- Available in both 600V and 1000V models.
- Test leads work with Fluke accessory test clips.
- Stays connected a lot longer than a solenoid type tester.
- Automatically turns off mode to conserve battery life.
- Optional holster attaches to a belt and safetly stows test leads.
- Automatically measures ac and dc volts with accuracy and digital resolution.
- Detachable SlimReach™ probe tips are customized for national electrical standards.
| Specifications |
| Continuity beeper |
| Threshold: |
On at <25 Ω, off at >400 Ω |
|
| Volts indicator LED |
| Threshold: |
Guaranteed on by 30V ac |
|
| Environmental Specifications |
| Operating Temperature |
|
| Storage Temperature |
|
| Humidity (Without Condensation) |
| |
0% to 95% (5 °C to 30 °C) |
| |
0% to 75% (30 °C to 40 °C) |
| |
0% to 45% (40 °C to 50 °C) |
|
| Dust/water resistance |
|
| Operating Altitude |
|
| Temperature Coefficient |
| |
0.1 x (specified accuracy)/degree C (<18 °C or >28 °C) |
|
| Safety Specifications |
| Overvoltage category |
| T5-600: |
600V ac/dc, CAT III |
| T5-1000: |
1000V ac/dc, CAT III
600V ac/dc, CAT IV |
|
| Agency Approvals |
|
| Maximum voltage |
| |
between any terminal and earth ground |
|
| Mechanical & General Specifications |
| Size |
|
| Weight |
|
| Warranty |
|
| Battery Life |
| |
200 hour zinc chloride, 400 hour alkaline |
|
| Battery type |
|
| Low battery indicator |
|
| Current sensor opening |
|
| Calibration cycle |
|
| Test leads |
| Type: |
Heavy duty, flexible leads rated for 1000V use. |
| |
Field replaceable leads terminate in male shrouded banana plugs |
| Probes: |
One red, one black. of two tip |
| |
Detachable Slim-ReachT probe tips in one |
| Styles: |
TP1 Slim Reach Test Probes |
|
|
|
|
|
Safety Conformance
All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed.
Knowledge and Information
