Description
The Fluke 233/A's meter body allows you to easily slide the wireless display out and place it where it is most easily seen (up to 33 feet/10 meters from the measurement point) while placing the multimeter in the place best fit to take measurements. The removable display features a flat bottom and back magnet that allows it to be placed or mounted on any flat surface so it can be easily seen. To use the Fluke 233 as a conventional multimeter, you simply attach the display to the meter body.
The detachable wireless display lets automative technicians:
- Attach test leads to brake lights while sitting in the driver seat, viewing the display and pressing the brake pedal.
- Run tests and read results at a safe distance from high current and high voltage systems.
- Record and test data comfortably no where how hard to reach the location may be.
- View underhood measurements on moving vehicles safely.
- Separate the tasks of reading test results and positioning the meter, allows you to devote time to each job (and work more safely).
Features and Benefits:
- 10,000 μF capacitance range.
- Measures up to 1000 V AC and DC.
- Frequency to 50 kHz.
- Battery life approximately 400 hours.
- True-RMS AC current and voltage for precise measurements on non-linear signals.
- Measure up to 10 A (20 A for 30 seconds).
- Easy to read, large digits display and bright backlight.
- Built in thermometer lets you to take temperature readings with only carrying one tool.
- Resistance, diode and continuity test.
- Min/Max and Average recording allows you to capture variations automatically.
- The removable magnetic display can be easily mounted where it is seen from almost any position.
- Easily used as a multimeter when the display is attached.
- Take measurements without holding the meter to help your focus on probes and making safe electrical measurements.
- Radio transmitter automatically turns off when the display is connected to the meter
- Auto power off maximizes battery life.
- Test continuity and diodes.
- Low power wireless technology allows the display to be carried up to 10 meters (33 ft).
| Detailed specifications |
| DC voltage |
| Range |
0.1 mV to 1000 V |
| Accuracy |
0.25 % + 2 |
|
| AC voltage |
| Range |
0.1 mV to 1000 V |
| Accuracy |
1.0 % + 3 |
|
| DC current |
| Range |
1 mA to 10 A |
| Accuracy |
1.0 % + 3 |
|
| AC current |
| Range |
1 mA to 10 A |
| Accuracy |
1.5 % + 3 |
|
| Fluke 233 Resistance |
|
| Counts |
|
| Capacitance |
| Range: |
1 nF to 9999 μF |
| Resolution: |
1nF |
|
| Fluke 233 Frequency |
| Range: |
5 Hz to 50 kHz |
| Resolution: |
0.01Hz |
|
| Temperature |
|
| Safety rating |
|
CAT IV 600 V , CAT III 1000 V |
|
| General specifications |
| Basic features |
| AC true-rms |
Yes |
| Ranging |
Auto/Manual |
|
| Display |
Removable Display
|
Yes |
| Backlight |
Yes |
|
| Data storage |
|
| Power |
| AA batteries: |
Three for main body; two for display |
|
| Battery life |
|
| Wireless frequency |
| 2.4 GHz ISM Band 10 meter range |
|
| Other features |
|
| Warranty and protection |
| Safety rating |
CAT IV 600 V/CAT III 1000 V |
| External protection |
Rubber overmold |
| Warranty |
Three-years |
| Size (H x W x L) |
5.3 cm x 9.3 cm x 19.3 cm (2.08 in x 3.6 in x 7.6 in) |
| Weight |
604 g (1.3 Ib) |
|
Safety Rating:
CAT III 1000V, CAT IV 600V
For Detailed Technical Specifications, Download the Fluke 233 Users Manual.
